Furniture Assembly in Bexley
Tell us what needs building at your Bexley address and whether you already have the complete order. We can discuss assembly, collection and work on existing furniture in one enquiry.

- Give the full postcode and delivery address
- Separate new furniture from items you intend to move
- Add the room and opening direction to a wardrobe plan
- Check carton references before arranging a combined visit
Compare the work before booking
| Where | Details to confirm |
|---|---|
| Retail branch | Release reference, all packs and pickup arrangements |
| Delivery address | Full postcode, unloading location and building contact |
| Assembly room | Clear floor, largest carton route and placement |
| Later delivery | Which piece is affected and reference for outstanding parts |
| Furniture | Decision or measurement |
|---|---|
| Wardrobe | Bay plan, usable height and clearance for fronts |
| Bed | Access side, base type and nearby storage |
| Office desk | Return, shared frame and drawer placement |
| Cabinet | Door movement and any wall attachment |
| Work | What to send |
|---|---|
| New assembly | Complete model and accessory list |
| Dismantling | Condition, joins and place for parts |
| Reassembly | Both addresses, new position and original hardware |
| Separate wall fitting | Instructions, brackets and mounting location |

Give us the collection and assembly addresses up front
If you have ordered furniture but it is still at the retailer, send the branch, order reference and carton count along with the Bexley address. Check which packs have been released. A door, pedestal or slat pack can be part of a furniture order even if the retailer lists it under a different reference. For collection and delivery, identify all the pickup points and tell us which pieces you want built afterwards. We can discuss the available arrangements against the actual postcode, access and retailer instructions.
If another carrier will deliver, tell us where they will leave the cartons and how to get them to the final room. A delivery to the door does not tell us whether the boxes are already on the correct floor. Give the route from the unloading point and mention access rules, any steps and a tight turn or doorway. For a lift, measure the clear opening and the inside depth if a long piece needs to go up. Let us know if a contact has to be there to provide access.

Mark the position of wardrobes and IKEA frame interiors
Send the model and sizes of the wardrobe and tell us whether its fronts are hinged or sliding. If the wardrobe will sit in a recess, send the narrowest usable width and the lowest ceiling height where it will stand. Some designs need space to assemble the frame in a particular position. The fitter checks the model instructions and aligns the frame before fitting the fronts. A drawer behind a hinged door needs enough space to extend once that door is open. A sliding door needs clearance to travel along its track.
With an IKEA PAX order, add the planner view and article references for doors, hinges, tracks and KOMPLEMENT fittings. Mark the position for each frame and show the layout of rails, drawers and shelves. If you want separate IKEA cabinet storage assembled, list its door or insert packs too. Tell us where the unit will stand and whether the product requires a wall restraint. Share the instructions and any permission needed for drilling. The fitter can check the fastening requirements when the wall and model are known.


Check what goes with the bed or cabinet before opening boxes
For a bed, give the model, mattress size and type of base. List the headboard, slats or storage components if they were supplied separately. The fitter uses the specified fasteners and checks the centre supports before fitting the base. On a lift-up bed, include the mattress specification where it is relevant. On a drawer bed, leave space on the opening side and show where nearby furniture will go. The fitter checks the supplied moving parts in the position in which you will use them.
For a chest or cabinet, give the model and quantities. State whether the drawers are supplied with the frame or in a different pack. The fitter checks alignment and matches the runners, hinges and fronts to the instructions. On freestanding shelving, list the separate inserts or shelves and mark the intended positions. Add the restraint instructions if the model requires one. If you also want a shelf mounted on the wall, list it separately and give the bracket and wall information. A wall fitting has different requirements from the fasteners joining the furniture panels.
Set out dining tables, home desks and workstation orders
For a table, give the model and the dimensions when open if it extends. If the top is one large rigid piece, share the carton dimensions as well. The fitter secures the top to its base and checks that the extension and supports operate as designed. Tell us if the table will stand beside a fixed bench or another piece that affects the seating. For a desk, mark the return side from the seated position and include the drawer or cable tray references if they are separate.
For an office order, distinguish independent desks from linked workstations. Give a layout by room or floor and include shared supports, end frames, chair quantities and drawer pedestals. Tell us where the delivery will be held and which areas will stay in use. If someone needs to meet the fitter, give the access instructions with the quote request. After the desks are built, check the intended layout and whether drawers, divider panels and cable fittings are accessible from the seats.
Include existing furniture on a separate part of the request
When a new order is replacing an existing item, decide whether the old piece needs dismantling or can move intact. Send photographs of joints, wall attachments and signs of damage. Tell us if a board was repaired, a joint was glued or the piece has been moved before. The fitter can inspect whether the connections can separate and whether the materials are suitable for reassembly. Empty the furniture and identify where to put the parts. If it will be used again, keep the hardware with the same set of panels.
For dismantling and reassembly, give the addresses and who will move the parts. Send the new position if the furniture will stand in a different layout. A desk may have a return on the other side, or a wardrobe may stand against a wall with different fixing requirements. The fitter checks alignment and operation after rebuilding and can discuss any required restraint. Mention a problem that was already present before dismantling, such as a drawer that catches or a damaged fixing point.
Keep one access route clear while large furniture is assembled
A long table top and wardrobe sides may need to be handled in the room where they will be used. Let us know whether that room can be cleared before the visit and what has to remain in it. If the hallway serves more than one room, show a place for cartons that will not block the route. Leave the model labels visible so the fitter can identify which carton to open. Tell us if another order will arrive during the visit and where it can be put while the earlier pieces are being built.
Give the intended position for a large cabinet or bed before the frame is finished. Some furniture becomes difficult to turn once the side panels or rails are joined. The fitter uses appropriate bits, drivers and hand tools for the supplied hardware and can check alignment with a tape or level where needed. After assembly, check the position, door and drawer movement and any unfamiliar mechanism with the fitter. Keep the manufacturer instructions and spare hardware together.

Match any replacement parts to the original order
If a replacement part is coming from the retailer, keep its label and the original order number. Mark which cabinet or bed it belongs to, especially if several units use the same finish. A replacement runner or drawer front may come on its own without any of the fasteners from the original pack. Keep those fasteners with the item until the fitter can compare them to the instructions. If the old part was damaged while being assembled, tell us where it was fitted and show the surrounding panel. That helps the fitter check the connection as well as the replacement part.
Request a quote for the specific Bexley address
Call or use the form with the full postcode, model references and quantities. State which items need assembly, delivery, dismantling or a separate fitting. Give any restrictions on access or drilling before agreeing the visit. If your order will arrive in stages, identify the cartons you have and the ones still due. Tell us whether complete pieces can be built first and which rooms matter most. Include any damaged packaging or previous assembly with the details so the fitter knows what to assess.
If a building contact is involved, give them the same room plan and order list you send with the enquiry. Show which furniture must stay accessible and where the parts of old furniture will go. For a multi-room build, mark the priority items and give us a contact who can discuss an alternative if an expected pack is missing. Keep the retailer reference available until the furniture is checked so that any delayed or replacement part can be matched to the correct piece.
Questions about furniture assembly in Bexley
Can I arrange collection from two retailers for the same Bexley address?
Send both collection points, references and the released carton counts. Ask whether the pickups can be arranged with your assembly visit.
Should I include the drop-off instructions if the furniture is delivered by someone else?
Yes. Explain where the carrier will leave the order and how it reaches the final room. That affects the access and handling needed for assembly.
What if the old wardrobe is fixed into the corner where the new one will go?
Send pictures of the attachment and the proposed new position. Add dismantling separately so we can discuss the sequence and what can be reused.
How can I tell you which bed storage side I want?
Show the room and mark where the headboard and drawers will go. Include the model so the available arrangements can be checked.
Can several rooms be included even if some furniture is still at the retailer?
Yes. List what is already delivered and what needs collecting, and identify the rooms that can be completed once the parts are available.
Furniture assembly in nearby areas
Get a furniture assembly quote for Bexley
Send your postcode, furniture list and access details so we can price the work.
