Furniture Assembly in Whitton

We assemble furniture in Whitton and can discuss collection or dismantling when it forms part of the job. Give us your furniture list and say what has already arrived so we can price the visit around the work that is ready.

Close view of a supplied garden furniture fitting
  • Keep labels available for orders with matching or incomplete cartons
  • Identify the front and interior packs for each IKEA wardrobe
  • Give the room and opening direction for beds with storage
  • Include photographs if a partly built item needs finishing

Make the delivery list usable for the fitting visit

If several boxes arrive with one delivery, check them against the item references on your order. A wardrobe can come in separate packs for the frame, front and interior. A storage bed may have different cartons for the base and the mechanism. You do not need to lay out all the hardware in advance. Keep the labels and instructions with the boxes and tell us which room they are for. Where a retailer has arranged a second delivery, say which items are still outstanding. That helps us discuss what work could go ahead without them.

If you can see damage to a carton, take a photo with the item label visible. For a panel already out of the box, show the affected area and its reference if it is in the instructions. A scratch in a concealed position and a broken fitting hole are different problems. Let us know before booking if the retailer has agreed to send a part. The fitter can check the condition of the parts that are available, but the quote should allow for the items you expect to be ready at the time of the visit.

Workers checking furniture cartons at a delivery address

Check the wardrobe route and the final opening clearance

Give the size of the longest frame carton if it needs to go upstairs. A landing can be wide enough for people but too short for a tall side panel to turn. Send a picture of the tightest part and note the usable opening if a door or rail reduces it. For a lift, give its internal length and the door opening. If the panels are already in the room, give the lowest ceiling measurement at the intended position and let us know about beams, slopes or wall projections that affect the frame.

For wardrobe assembly, tell us whether the doors hinge or slide and which way you want them to open. The assembler builds the supplied frame, fits the shelves, rails and fronts, then checks that the doors move as intended. A hinged door can catch on a radiator or a handle on another cabinet. Sliding fronts need the specified tracks and space to fit the panels. If the instructions call for a wall restraint, tell us what you know about the wall, skirting and any limits on drilling. The fitting depends on the model and the available wall.

Wardrobe installer arranging side panels on a clear floor
Readiness checks for a furniture order
Order statusInformation to send
All cartons receivedItem references, room and quantity for each assembled piece
A fitting pack is due laterWhich frame or front it belongs to and any retailer reference
Visible carton damageLabel photo and a view of the damaged panel or packaging

Send the plan when ordering a mixed IKEA interior

For IKEA PAX assembly, include the retailer plan and the article numbers for the frame, doors and interior packs. In a two-bay wardrobe, say which bay should get the drawers and which gets a long hanging rail. Some fittings must be positioned clear of a hinge. If you intend to change the plan, mark what should go where before the visit. Keep the hardware packs for different frames separate so the assembler can match the fasteners and brackets to the right pieces.

Other flat pack storage needs the exact model too. A low cabinet with a hinged front is different from an open shelving unit, even in the same range. If you want two units joined, include the supplied connection kit and show how they should be arranged. The fitter checks the frame and the movement of the fitted doors and drawers. Where you are adding new storage beside an existing unit, give the old unit’s depth and height so the difference in the two models is clear before assembly.

Assembler working on flat pack furniture in a living room

Make the usable space for beds and cabinets clear

For a bed, send the size, model and type of storage. Tell us whether a drawer opens at the side or foot and whether a lifting frame needs to clear a shelf. The fitter joins the frame and supports, fits the supplied slats or platform and checks any storage mechanism. If the mattress has already arrived, keep it out of the working area where possible. Let us know whether you expect the old bed to come apart first. Include the headboard and any separate storage pieces so they are accounted for in the booking.

For a sideboard, chest or bookcase, tell us where the unit should stand and how the doors or drawers need to open. The fitter uses the supplied runners, hinges and shelf supports and checks the fitted parts in place. If the cabinet will sit next to a wall or another piece, show the clear space at the front. A wall-mounted shelf or mirror is a separate fitting request. Send the bracket details and proposed position, including anything that restricts drilling or makes the wall difficult to reach.

Installer building a flat pack cabinet
Where to check working clearance
PieceSpace that matters
Wardrobe with sliding frontsRoom at the front to fit tracks and pass the doors
Bed with drawersClear floor beside the storage opening
Return deskChair movement and pedestal access from the seated side
Details for work beyond new furniture assembly
RequestWhat helps price it
Finish a cabinet that is partly builtPhotos of attached boards and the remaining parts
Rebuild a used wardrobeCondition of reusable joints and new wall information
Fit a separate wall shelfSupplied bracket, proposed height and wall type

Work out which direction a desk or table needs to face

A return desk needs a clear instruction about which side the extra section goes on, taken from the seated position. Give the product reference so we can check if the design allows the orientation you want. If there is an under-desk pedestal, show the space for the chair and where the drawers open. For a dining table, give the length in use if it extends or folds out. The fitter builds the supports and top and checks the supplied moving parts where there is room to operate them.

With office furniture assembly, send the number of each desk and cupboard, plus a room plan if desks are linked or share accessories. List the cable trays, screens and pedestals in the order. Tell us whether access to the room is restricted during working hours or whether existing desks must stay in use. The fitter can assemble the furniture and attach agreed accessories supplied with it. Setting up electrical items, power or data connections is separate. Mention where the cartons are to be left before the work begins, especially when they belong to more than one room.

Installer fastening a dining table leg

Assess existing or partly assembled pieces before taking them apart

If a piece has already been part built, photograph what is attached and what remains loose. Tell us whether anything was fitted in the wrong position or whether a panel is damaged. Keep the model instructions available. The fitter can check how much work has to be undone before completing it. If the furniture needs to go from one room to another, send the dimensions of the built piece and show any tight parts of the route. Moving a frame intact may be possible, but the door, lift or landing determines what needs separating.

When you need dismantling and reassembly, share pictures of accessible joints and fixings, particularly if the furniture has moved before. An older cabinet may have wall restraints, replacement screws or an attachment to the next unit. The fitter checks whether parts can be separated and whether the fittings can be reused. Keep hardware with its original panels during the move. Tell us about the new room, including wall type where relevant, so the reassembly quote accounts for the intended layout and any fixing work requested.

Give us the quote details for assembly, collection and any extras

For furniture collection and delivery, send the pickup point, reference or seller arrangements, delivery address and the number and size of the pieces. Confirm the retailer has the order ready for collection. A private seller’s furniture may already be assembled, so include its finished dimensions and whether it needs taking apart. Let us know where each piece is to be left and whether it needs building there. The quote needs to reflect the work at each address, including any unusual access for carrying the items.

For an assembly visit in Whitton, send the full postcode, furniture references, rooms, and any stairs, lift or restricted access. List wall shelves, mirrors or a furniture restraint as separate details and tell us what fittings are included. Once the work is done, check drawers, doors and storage with the fitter in the positions where you will use them. Keep the instructions and any spare hardware together. If one delivery is still missing, retain the item list and update it so the next enquiry can identify exactly which piece is waiting.

If an order has been changed since you first asked for a quote, send the replacement reference before the visit. A revised wardrobe frame or desk top may need a different door set or base, even if the finished dimensions are close. Include the new delivery information and say whether the old carton is still on site. The fitter should be able to distinguish the pieces for assembly from items that are waiting to go back to the retailer.

Questions about furniture assembly in Whitton

What should I do if the retailer sends a different model after I book?

Send the revised product reference and delivery details. Tell us which old cartons are still on site so the fitter can identify the correct pieces.

Can you fit a replacement runner while finishing a drawer unit?

Send the model, a photo of the drawer and the replacement part number. The fitting needs to be suitable for the unit before it can be installed.

Can I arrange pickup from a seller if the wardrobe is still built?

Include the finished dimensions and condition, plus the collection access. Tell us if dismantling is needed there and whether it should be rebuilt at your address.

How do I show which bay should have a long hanging rail?

Mark the bay on the IKEA plan and include the article numbers for the frame and rail. A simple left-to-right note can distinguish frames of the same size.

What if the table has not arrived but the chairs are ready?

List the chairs and table separately. We can discuss whether it makes sense to book the chairs first or to wait until the entire dining set is on site.

Furniture assembly in nearby areas

Get a furniture assembly quote for Whitton

Send your postcode, furniture list and access details so we can price the work.

Call 020 3404 5905